 |
|
|
| |
Progressive Lenses
Chemilux
|
New Generation Progressive: Chemilux
The A-One Progressive lens has been designed based on a physiological approach proven through a series of clinical tests by Chemilens. You will find adjusting the lenses much easier as it is designed for first-time PAL wearers or people who want to replace their uncomfortable PAL.
· Short corridor: 12.5mm (from the "+" eye point to the tip of the front)
· A wider front section with reduced distortion aberrations for a wider field of vision
· No Haziness on the fringes and wide coverage makes it a suitable lens even for first time wearers
· Designed for wear-ability even on small frames (30mm)
· New concept progressive design makes both 1.50 and 1.60 possible by transmissivity for a wide selection
· Designed with optical movement of 2.5mm, making it suitable even for large frames
· Applicable on multidesigns by progressive prescription (Inset design).
A-One Centration Chart 
A-One Progressive Zone by Class Measurement
The lenses provide a wider distance zone with lower distortion from Chemilens’ latest smoothing technology.

What is Progressive Addition Lens (PAL)?
RThis state-of-the-art optical lens was designed to enable effective vision of far distances and close distances with one optical lens. There is no need to carry an extra pair of glasses to see close objects and as this is not apparent on the exterior, these lenses take style and sophistication to the next level.
|
CHEMILUX A-ONE 150
CR-39 1.50 Progressive Short Corridor 12.5mm
Raw Material: CR-39 |
|
|
| Refractive Index |
1.50 |
|
| Add Power |
+0.75 ~ +3.50 |
|
| Design |
Decentration: 2.5mm
Fitting Point: 4.0mm above MRP
Frame Minimum Size: 30mm |
|
| Marking |
A1 |
|
| Base Curve |
2K, 4K, 5.5K |
|
| Specific Gravity: |
1.32 |
|
| Abbe Value |
58 |
|
| Diameter |
75/70mm |
| Coating |
Green HMC, EMI, USH |
|
CHEMILUX A-ONE 160
High-Index 1.60 Progressive Short Corridor 12.5mm
Raw Material: MR-8 |
|
|
| Refractive Index |
1.60 |
|
| Add Power |
+0.75 ~ +3.50 |
|
| Design |
Decentration: 2.5mm
Fitting Point: 4.0mm above MRP
Frame Minimum Size: 30mm |
|
| Marking |
A1 |
|
| Base Curve |
2K, 4K, 5.5K |
|
| Specific Gravity: |
1.30 |
|
| Abbe Value |
42 |
|
| Diameter |
75/70/65mm |
| Coating |
Green HMC, EMI, USH |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|